1000ML Snow Foam Generator Foamer Lance Sprayer Nozzles For Different Brands High Pressure Car Washer Gun Machine
This is Snow foam maker with 1000ML capacity container. We provide it with different kinds of adaptors for major and famours high pressure washer machine, such as For Karcher Nilfisk Elitech LAVOR Interskol HUTER Stihle Hitachi DAEWOO Black Decker and so on.
1. With NEW GENERATION sprayer knob, which is more strong and metal made by pure brass.
2. New generation construction, installed 2x foamer mesh, make the foam to be more high density.
3. It works with any pressure washers, small and big are all working perfectly
4. Foam density adjustable, foam spray angle adjustable.
5. With 11 kinds of nozzle for famours brands of pressure washer. You can find one fit for your washer gun.
Note before buying:
We provide this snow foam generator several types of nozzle adaptors for washer jet gun. Please check below information to choose the foam maker with correct adaptor. If you can not choose the correct one, send us the photo to show the nozzle of your jet spear and we will find correct one for you. Thanks in advance.
Suitable for Lavor Parkside Foreman Sterwins Sorokin Copokin Hammer Champion
HUTER (only for M135-HP)
Suitable for part of Nilfisk and Anlu.
Also for HUTER: W105-AR, W105-G, W105-GS, W105-QC, W105-P(Old), W105-QD, W135-AR,W165-AR. M135-PW(Old), M165-PW(Old)
Suitable for Karcher HDS HD series OLD TYPE washer gun. Nozzle diameter is OD:22MM, ID 14MM. Also for other brands with same port
Suitable for Black Decker, / Skil 0760/ Makita/ AR Blue/ Michellin
Also for Interskol: AM120/1700, AM130/1800, AM140/2000, AM100/1300, AM120/1500, AM130/1700
And For Bosch new AQT Aquatak(After 2013): 33-10, 33-11, 35-12, 37-13, 40-12, 42-13, 45-14,EASY AQUATAK 110,
EASY AQUATAK 120, ADVANCE AQUATAK 135, UNIVERSAL AQUATAK 135, ADVANCED AQUATAK 150,
ADVANCED AQUATAK 160
Adaptor is 22mm(OD) /14mm(ID), For Kranzle/ Himore/ Ubermann and Others washer gun with M22 M14 Thread
Suitable For Italian Nilfisk/ KEW / ALTO WAP CALM
Suitable For: Old model of Bosch Washer(Before 2013) 10,100,100 Plus, ESO,110,110 Plus,115 Plus,1200 Plus
Suitable For Nilfisk Gerni Series Pressure Washer
And For STIHLE RE98 RE108 RE118 RE127 RE128 RE163
Suitable For Karcher K2 K3 K4 K5 K6 K7 pressure washer gun.
Suitable For Pressure washer gun with G1/4 Quick Realease Connector:
Suitable For Elitech/ Robinzon / Sturm / Texas
And For DAEWOO DAX Series
And For HITACHI AW100 AW130 AW150 and others.
And For HUTER W105-P(New), W165QL, W195QL ,M135-PW(New), M165-PW(New)
And For Interskol: AM100/1400C, AM120/1500C, AM140/1800C, AM100/2000B
Capacity of bottle: 1000ml (1L)
Pressure Range: 100 bar - 200 bar (1400psi - 3000 psi)
Durability: 10 Years
Warranty: 2 Years (except the mesh filter inside)
Construction Material: Solid Brass, Resistant Nylon, & PA bottle
Maximum Water Temperature: 60° C
Chemical Resistant: Yes
Foam Consumption Adjustable: Yes
Spray Width Adjustable: Yes
Size: about 29 * 16 mm/ 1.08 * 0.63 inches( 1 cm = 0.394 in)
Installation process for this foam cannon.
1.Put the shampoo or wash power into bottle and fill in water,shake or wait few minutes to Dissolve.
2. Intall the bottle onto sprayer and screw tightly.
3. Connect whole unit to washer gun, make sure you lock them well.
4. You can start to spray foam onto your car.
Some tips of using this foam maker cannon:
1. You'd better use consentrated car wash powder specially for car washing.
2. In winter, use warm water can make more foam than cold water.
3. After foaming the car, wait for few munites and then clean the foam. That makes better clean result.
4. Clean and try the bottle and foamer after using it.
|Foam density adjustable||Yes|
|Function||Generating foam to cleaning washing the car|
|Handle Type||Finger Grip|
|Spray angle adjustable||Yes|
|Sprayer generation||New generation|
|Water Spray Type||Fan|
|With Adaptors||With adaptors for Karcher LAVOR Nilfisk Bosch Hitachi Daewoo others|
|With Water Pipes||No|